| SYMBOLS | 1N5059 | 1N5060 | 1N5061 | 1N5062 | UNITS | |
| * Maximum repetitive peak reverse voltage | VRRM | 200 | 400 | 600 | 800 | Volts |
| Maximum RMS voltage | VRMS | 140 | 280 | 420 | 560 | Volts |
| * Maximum DC blocking voltage | VDC | 200 | 400 | 600 | 800 | Volts |
* Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=75°C |
I(AV) | 1.0 | Amp | |||
* Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) |
IFSM | 50.0 | Amps | |||
| * Maximum instantaneous forward voltage at 1.0A | VF | 1.2 | Volts | |||
* Maximum full Load reverse current, full cycle average 0.375” (9.5mm) TA=25°C lead length at TA=75°C |
IR(AV) | 5.0 | μA | |||
| 150 | 100 | |||||
* Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=175°C |
IR | 5.0 | μA | |||
| 300 | 200 | |||||
| Typical reverse recovery time (NOTE 1) | trr | 1.5 | μs | |||
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | pF | |||
| Typical thermal resistance (NOTE 3) | RQJA | 55.0 | °C/W | |||
| * Operating junction and storage temperature range | TJ, TSTG | -65 to +175 | ℃ | |||